CARE TIPS
|
General advises for residential environmentPERGO® floors are easy to keep clean since dirt and dust can’t stick to the surface.
|
General advises for commercial environment
Cleaning After The Installation
Generally it is not necessary to do any heavy cleaning after a glue-free installation. Damp mop the floor to remove any dirt or dust. Use recommended amount of PERGO® cleaner in the water.


Ordinary Cleaning
Run over with a vacuum cleaner or a dry mop. If necessary use a damp cloth with some PERGO® cleaner in the water. Don’t overdose. Never use liquid soap or soap suds since that could create a coat on the floor. For best result, wipe dry afterwards.
Cleaning Machines

When dirt is attached hard to the surface a cleaning-machine can be used. The cleaning machine must be of combi type witch collects the dirty water after cleaning. The machine should have vertically rotating half-hard brushes. Wipe dry afterwards.
Others
No special surface treatment or polishing should be used. Wax or polish will not destroy the surface but it builds up a dirt-collecting coat on the floor. This coat could be hard to remove.
Stain Removal Guide
| Problem | Solution |
| Chocolate, grease, juice, wine.> | Lukewarm water and a little mild detergent. Wipe away with a damp cloth. |
| Tar, chalk, lipstick, oil, shoe polish, ink , soot , nail varnish or cigarette ends. | Methylated spirit, acetone or petroleum spirit. Wipe away with a damp cloth. |
| Candle wax and chewing gum. | Carefully scrape off once hardened. Wipe away with a damp cloth. |



